Urtasun 2020 URTASUN TECNOLOGÍA ALIMENTARIA production line
Location:łódź
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 89 380...
Show
+49 89 38031644
Poland, Krotoszyn
€ 1000000
Food conveying and processing equipment
LIST OF EQUIPMENT
1.Incline auger conveyor (fabricated in Q4 2020)
2.Fruit declumper/breaker (fabricated in Q4 2020)
3.Metal detector shaker (metal detector head not included) (fabricated in Q4 2020)
4.Redler elevator (fabricated in Q4 2020)
5.Grading shaker with an additional set of screens (fabricated in Q4 2020)
6.Horizontal belt conveyor (fabricated in Q4 2020)
7.Redler elevator (fabricated in Q4 2020)
1. INCLINE AUGER CONVEYOR
Dimensions
Features
Fully built in stainless steel
Accumulation hopper of 1 m3 capacity made of textured stainless steel
Cleaning window at the lower part of the hopper
Evacuation screw of 300 mm diameter built in stainless steel
Open upper side of the screw for cleaning
Draining valve for cleaning
Upper screens to avoid big frozen blocs
Safety protections
2. FRUIT DECLUMPER/BREAKER
Dimensions
Features
Fully built in Stainless Steel AISI-304
Grinder drums composed by
Solid core
Solid fingers for grinding
Stainless steel sprockets
Supporting box for production by means of the grinders or without grinders
Stainless steel bearings
Safety protections
Powered by means of SEW motoreducer
3. METAL DETECTOR SHAKER (metal detector head not included)
Dimensions
Features
Fully built in stainless steel
Tray fully built-in stainless-steel plate
composed by
First level with screens for the single product
Not single product remover area
included in the first level
Second level with screens to remove the small pieces and juice
Juice collecting level and drainage outside the machine
Second level exit
for the good product made in PE blue to pass trough the metal detector
Vibration by means of fibber springs working at high frequency
Reaction mass in 5 mm stainless steel plate
Isolation by means of rubber silent blocks
Chassis in stainless steel structural profile for the required working height
Powered by-mass motor-vibrators (OLI trademark)
Supported over columns
4. REDLER ELEVATOR
Dimensions
Upper horizontal track: 1.800 mm
Lower horizontal track: 1.900 mm
Height of charge: 600 mm
Height of discharge: 3.850 mm
Width of blades: 500 mm
Inclination: 60 º
Features
Built of stainless steel AISI 304. Thickness of the bottom plate 4mm (electro-polished)
Stainless steel dragging conveyor belt on deslidur guide with Z-18 sprocket. URTASUN certified chain
Blue polythene pusher blades
Driven by SEW motor gearbox
Auto tension system
Anti-return system
Stainless steel bearings with Stainless steel housing
Protection safety
stainless steel round bars
Manual cleaning gate (easy sliding) placed in the lower horizontal track
Diagonal exit
5. GRADING SHAKER WITH SET OF SCREENS
Dimensions
Sizes: 3 sizes + 1 over sizes = 4 sizes
Features
Fully built in stainless steel
Tray fully built-in stainless-steel plate
composed by
6 grading screens of 600x800mm with easy adjustment. 50 mm step between each set of 2 size’s screens. Note additional set of 27 screens is included in the offer
Size collecting hopper for every 2 screens
to collect in total 3 sizes
Connecting chute between hopper and downstream equipment
Exit of oversize by the front of the shaker
Connecting chute from front exit to a container for oversize
Vibration by means of fiber springs working at high frequency
Reaction mass in 5 mm stainless steel plate
Isolation by means of rubber silent blocks
Chassis in stainless steel structural profile for the required working height
Powered by-mass motor-vibrators (OLI trademark)
Supported over columns
Power supply: 2 Kw
6. HORIZONTAL BELT CONVEYOR
Dimensions
Features
Fully built in Stainless Steel AISI-304
Belt Intralox thermoplastic and modular material
Traction by thermoplastic sprockets
Retaining sides
Floating scraper for cleaning of the belt
Driven by pendular SEW motor gearbox
Back lock and motor gearbox cover
Side protections placed in transmission zones to avoid risk of entrapment
Stainless Steel bearings
7. REDLER ELEVATOR
Dimensions
Upper horizontal track: 1.300 mm
Lower horizontal track: 1.700 mm
Height of charge: 600 mm
Height of discharge: 2.600 mm
Width of blades: 500 mm
Inclination: 60 º
Features
Built of stainless steel AISI 304. Thickness of the bottom plate 4mm (electro-polished)
Stainless steel dragging conveyor belt on deslidur guide with Z-18 sprocket. URTASUN certified chain
Blue polythene pusher blades
Driven by SEW motor gearbox
Auto tension system
Anti-return system
Stainless steel bearings with Stainless steel housing
Protection safety
stainless steel round bars
Manual cleaning gate (easy sliding) placed in the lower horizontal track
Find more here
show contacts
Contact us at
show contacts